The program using the LPT-port to selectively switch on/off up to 12 electrical devices. Devices can be managed by the following main ways: manually; using the five sensors; the contents of two text files f1 and f2; timer (schedule); from any computer of the local network, if you have installed the application LPTS_Client; remotely using the phone keypad, if the computer where you installed the program LPT_Switch have a 'voice' modem. Also if there is no response to ping program can restart the devices connected to local area network. Possible operation logic controller - run control devices program, prepared by the user. Besides the ability to work from a prepared script - enable/disable devices and set playback wav-or mp3-files in real-time mixing (simultaneous playback) of different sounds. Hot keys to manage the devices. Software emulation of pressing keys on the keyboard, depending on the status of sensors.
Keywords: LPT port, electrical devices, switch on, switch off, sensor, timer, schedule, play, script, controller, telephone, ping,
Recent Changes: Remote switching on and off devices at the remote phone. Need voice modem, so the program was able to answer the incoming call and decode the commands received from the keyboard caller's phone. If there is no response to the ping, then reboot the devices connected to a local area network computer.
Install Support: Install and Uninstall
Supported Languages: English
Additional Requirements: Pentium-200MMX or higher,64 RAM, 800x600xHiColor